ISCOM2600G(-PWR) Series
The ISCOM2600G (-PWR) series switches is the new-generation and cost-effective Layer 2 Gigabit Ethernet switches.
We'll be happy to answer all of your technical, pricing & availibility questions

The ISCOM2600G(-PWR) series switches is the new-generation and cost-effective Layer 2 Gigabit Ethernet switches. It adopts a route switching software platform based on the Linux OS, and a high-performance hardware platform. With multiple interface types, such as ISCOM2608G-2GE/-PWR,ISCOM2600G-28X/-PWR,ISCOM2600G-28X-24F,ISCOM2600G-52X, it can provide flexible networking modes.

Featuring high reliability, high access security guarantee, easy administration, and simple management, it can meet carriers' requirements. In addition, it supports static route, ready IPv6, intelligent PoE, and so on. Therefore, it is widely adopted, such as access device of enterprises, campuses, residences, and CDN.

• High capacity, high density
• High reliability and protection
☉STP, RSTP, MSTP, and multi-RSTP
☉ITU-T G.8032 with fault switching time less than 50ms
☉Dual-system and dual-configuration-file redundancy backup
• Various security guarantees
☉Various AAA mode such as RADIUS and TACACS+
☉IEEE 802.1x authentication
☉Port secure MAC and limits on the MAC addresses to stop attacks from illegal users
☉Various ACL policies to control packet forwarding flexibly
☉DHCPv4/v6 Snooping and Option 82/18/37 to avoid DHCP attacks
☉DAI and IP Source Guard based on the DHCP binding table to prevent ARP flooding attacks and IP attacks
☉Broadcast storm and loop detection to ensure the stability of the network
☉Lightning protection for the power supply and all the Ethernet electric interfaces and protect hardware investment of the customer
• Fine tunable QoS
☉Rich scheduling policy such as SP, WRR, or SP+WRR, DRR, or SP+DRR
☉Dual-bucket three-color CAR based on the traffic and H-CAR
☉Statistics based on traffic
• IPv6 Ready
☉IPv6 management
☉DHCPv6 Snooping, RA Snooping and Option18/37 to ensure the network security
☉MLD Snooping to ensure the IPv6 multicast monitoring
• Smart PoE
☉IEEE802.3af/IEEE802.3at standard
☉PD alive-check
☉Configuring reboot the PD at a specific time each weak
☉Supplying power during specified time interval
• Advanced management system
☉SNMP, RMON, Telnet, SSH and provide friendly WEB management interface to increase the usability of the device
☉Automatic configuration and loading. The administrator can put the configuration file set in advance to the TFTP server for the automatic loading of the switch while it is booting, thus simplifying the management and maintenance






Port type

Uplink: 2 x GE SFP

Downlink: 8 x GE RJ45

Uplink: 4 x GE/10G SFP+

Downlink: 24 x GE RJ45 or 24 x GE SFP

Uplink: 4 x GE/10G SFP+

Downlink: 48 x GE RJ45

Management interface

1 Console interface (ISCOM2608G-2GE/-PWR has no SNMP port)

Switching capacity




Packets switch rate





260(L) x 130(W) x 43.6(H)

PoE: 300(L) x 220(W) x 43.6(H)

440(L) x 220(W) x 43.6(H)

PoE: 440(L) x 300(W) x 43.6(H)

440(L) x 300(W) x 43.6(H)



PoE: <2.5

< 2.6

PoE: <4.95

< 4.3

Max Power consumption

< 20W

PoE: <150W,

124W power supply

< 25W

PoE: <440W,

370W power supply

< 45W


Power: single AC/DC (except ISCOM2648G-4C: single or dual power, AC/DC/AC-D/DC-D)

Fan: no fan design (except ISCOM2648G-4C and PoE)

Working temperature: 0–50°C

Relevant humidity: 10%–90% RH (non-condensing)

Voltage range: AC 220V(100~240V), DC 48V(-36~-72V)

anti-thunder (cable port): 6kV

MTU: 9216B